Definition
app_weld_signal_contact_status(ch_arc=[0,1], ch_gas=[0,1], ch_wire=[0,1], ch_mcn=[0,1], timeout=0.1)
Features
It monitors the arc, gas, and wire signals during welding and raises an error handling popup if there is an abnormality.
Parameter
|
Parameter Name |
Data Type |
Default Value |
Description |
|---|---|---|---|
|
ch_arc |
list(int[2]) |
[0,1] |
[0] Arc Status Digital Input Channel (1-16), (default: 0) [1] Contact status (A contact:1, B contact: 2), (default : 1) |
|
ch_gas |
list(int[2]) |
[0,1] |
[0] Gas status Digital input channel (1-16), (default: 0) [1] Contact status (A contact: 1, B contact: 2), (default : 1) |
|
ch_wire |
list(int[2]) |
[0,1] |
[0] Wire Status Digital Input Channel (1~16), (default: 0) [1] Contact status (A contact: 1, B contact: 2), (default : 1) |
|
ch_mcn |
list(int[2]) |
[0,1] |
[0] Machine Status's Digital Input Channel (1~16), (default: 0) [1] Contact status (A contact: 1, B contact: 2), (default: 1) |
|
timeout |
float |
1.0 |
The maximum waiting time about Arc-Wait (default: 1.0 sec) |
Return
|
Value |
Description |
|---|---|
|
0 |
success |
|
negative value |
fail |
Exception
|
Exception |
Description |
|---|---|
|
DR_Error (DR_ERROR_TYPE) |
Parameter data error |
|
DR_Error (DR_ERROR_VALUE) |
Invalid parameter value |
|
DR_Error (DR_ERROR_RUNTIME) |
C Extension module error |
|
DR_Error (DR_ERROR_STOP) |
Program terminated forcibly |
Example
app_weld_signal_contact_status(ch_arc=[0,1], ch_gas=[0,1], ch_wire=[0,1], ch_mcn=[0,1], timeout=1.0)