It is not supported on the P-series.
Warning
[Type] “On/Off”(0) is a type of control the 1bit signal.
[Type] “Select”(1) is a type of control the 1bit ~ 8bit signal.
[Type] “Value”(2) shows below [Data Size]'s description.
-
[Data Size] is valid when the value was “Above 15bit”(5, 6, 7).
|
Variable type |
Default value |
Description |
|---|---|---|
|
list(int[7]) |
0 |
Disable: 0 Enable: 1 |
|
0 |
Type
|
|
|
0 |
Digit
|
|
|
0 |
Byte Offset: 1 ~ 255 |
|
|
0 |
Bit Offset: 1 ~ 255 |
|
|
0 |
Data Size 0: 1bit (disable low) 1: 1bit (disable high) 2: 2bit 3: 4bit 4: 8bit 5: 15bit 6: 16bit 7: 32bit |
|
|
0 |
Valid Data Size |