MoveFn()

Sample Code: MoveFn()

# Select Motion
def MoveFn(mType, ref_Pos, ref_Vel, ref_Acc, ref_Time, ref_Radius, ref_Frame, ref_Mod, ref_Reactive, ref_Apptype, ref_Sol, sync_Mode):
    # Input data (Example): 
    # mType = "movel"
    # ref_Pos = posx(X, Y, Z, A, B, C) (if mType == "movej": posj(j1, j2, j3, j4, j5, j6))
    # ref_Vel = 100 mm/s (if mType == "movej" or mType == "movejx" : 30 deg/s)
    # ref_Acc = 100 mm/s^2 (if mType == "movej" or mType == "movejx" : 30 deg/s^2)
    # ref_Time = 0 sec
    # ref_Radius = 0 mm
    # ref_Frame = DR_BASE 
    # ref_Mod = DR_MV_MOD_ABS
    # ref_Reactive = DR_MV_RA_DUPLICATE
    # sync_Mode = "sync"
    # ref_Apptype = None # ref_Sol = None
    # Predefined Value
    if ref_Apptype == None:
        ref_Apptype = DR_MV_APP_NONE 
    if ref_Sol == None:
        ref_Sol = get_current_solution_space() # Current Solution Space
    if sync_Mode == "sync":
        if mType == "movel":
            movel(ref_Pos,vel=ref_Vel,acc=ref_Acc,time=ref_Time,radius=ref_Radius,ref=ref_Frame,mod=ref_Mod,ra=ref_Reactive, app_type=ref_Apptype)
        elif mType == "movej":
            movej(ref_Pos,vel=ref_Vel,acc=ref_Acc,time=ref_Time,radius=ref_Radius,mod=ref_Mod,ra=ref_Reactive)
        elif mType == "movejx":
            movejx(ref_Pos,vel=ref_Vel,acc=ref_Acc,time=ref_Time,radius=ref_Radius,ref=ref_Frame,mod=ref_Mod,ra=ref_Reactive,sol=ref_Sol)
    elif sync_Mode == "async":
        if mType == "movel":
            amovel(ref_Pos,vel=ref_Vel,acc=ref_Acc,time=ref_Time,ref=ref_Frame,mod=ref_Mod,ra=ref_Reactive, app_type=ref_Apptype)
        elif mType == "movej":
            amovej(ref_Pos,vel=ref_Vel,acc=ref_Acc,time=ref_Time,mod=ref_Mod,ra=ref_Reactive)
        elif mType == "movejx":
            amovejx(ref_Pos,vel=ref_Vel,acc=ref_Acc,time=ref_Time,ref=ref_Frame,mod=ref_Mod,ra=ref_Reactive,sol=ref_Sol)
    return True