To ensure maximum input accuracy, observe the following:
-
Use shielded or twisted pair cables.
-
Connect the cable shield to the ground terminal inside the controller.
-
The electrical specifications of the analog I/O terminal are as follows:
|
|
|
|
|
|---|---|---|---|
|
|
|
|
- |
|
|
|
4 - 20 mA |
|
|
|
|
||
|
|
|
12 bit |
|
|
|
|
|
0 - 10 V |
|
|
|
- |
|
|
|
|
1M ohm |
|
|
|
|
12 bit |
|
|
|
|
|
- |
|
|
|
4 - 20 mA |
|
|
|
|
50M ohm |
|
|
|
|
16 bit |
|
|
|
|
|
0 - 10 V |
|
|
|
- |
|
|
|
|
1 ohm |
|
|
|
|
16 bit |
|
-
Depending on the output signal (voltage/current) of the device, it is necessary to set the controller analog input as “Voltage” or “Current” on the teach pendant.
-
Depending on the input signal (voltage/current) of the device, it is necessary to set the controller analog output as “Voltage” or “Current” on the teach pendant.
