The molding machine is a device that molds shapes by injecting materials such as plastic into a mold.
-
If the machine is equipped with a sensor that checks input signals, input signal check is available.
-
It can only be operated with the Controller Digital Output signals.
Signal Setting
|
Item |
Description |
|---|---|
|
out_Machine_Start |
This configures the output signal for starting the injection molding machine. |
|
Machine_Ready_in |
This configures the input signal for authorizing injection molding machine operation. |
Support Action (DRL)
|
Item |
Description |
|---|---|
|
Machine_Start |
It operates the machine with the out_Machine_Start signal on. |
|
Reset_IO |
It is a function that turns off an output signal that is turned on. |
|
Check_Machine_Input |
It waits for the machine ready input signal. (Timeout = 10 seconds) |