Features
It is an asynchronous type motion command and executes the next command at the same time as the motion starts. It is a motion that follows the most recent target joint position within the maximum velocity and acceleration among commands transmitted continuously.
Parameter
|
Parameter Name |
Data Type |
Default Value |
Description |
|
fTargetPos |
float[6] |
- |
Target joint location for six axes |
|
fTargetVel |
float[6] |
- |
Velocity |
|
fTargetAcc |
float[6] |
- |
Acceleration |
|
fTargetTime |
float |
- |
Time [sec] |
-
If fTargetTime is entered, if the arrival time cannot be kept due to the maximum speed/acceleration condition, it automatically adjusts and displays a notification message.
-
Currently, it is not linked with the operation speed adjustment function of the change_operation_speed function.
Return
|
Value |
Description |
|
0 |
Failed |
|
1 |
Success |
Example
float q0[6] = { 0, 0, 90, 0, 90, 0 };
float jvel[6]={10, 10, 10, 10, 10, 10};
float jacc[6]= {10, 10, 10, 10, 10, 10};
drfl.servoj(q0, jvel, jacc, -10000);