Skip to main content
Skip table of contents

Overview of Footer

Menu Layout


ItemDescription
1Turn off button
This button turns off the platform. Press and hold the button for about 1-2 seconds.
2Servo on/off switchThis is the section where you can turn on/off the servo.
3Operator/Supervisor
This button can change Operator/Supervisor level.

When changing the administrator level, the administrator password must be entered.


4Auto switch

This button changes the state of the robot to Auto or Manual. The changed value can be seen in the upper left corner of the screen.

5HomeYou can go to the Dart-Platform home screen.
6Favorite ModulesThis is a list of favorite modules.
7Virtual&Real switch
  • This is where you can choose whether to operate a virtual or real robot.
  • This switch is only enabled when the servo is turned on.
83D Simulator buttonThis is a button that makes it easy to view the 3D Simulator while running the module.
9Play/Pause/Resume/StopThis button allows you to run, pause, resume, or stop the robot.
10Speed Slider
  • This button allows you to set the robot's operation speed.
  • Clicking on this area will bring up a popup where you can set the speed, which can be changed using a slider or by entering text.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.