Validity and Responsibility

This manual does not provide information about the design, installation and operation methods of robot applications integrated with other system. In addition, this manual does not provide information that may influence the safety of the integrated system.

The system administrator must install the robot in a way that observes various safety requirements according to the related national standards and regulations. In addition, the staff in charge of integrating and managing the robot in a system must ensure that all related national safety legislation and regulations are observed. The entity or user of the final system in which the robot is integrated has the following responsibilities, and such responsibilities are not limited to the items listed below.

Risk assessment of the system with the robot integrated
Installation and removal of safety devices according to the outcome of the risk assessment performed
Confirmation of whether the system is properly designed, set up and installed
Establishment of system operation and instructions
Management of suitable safety settings in the software
Prevention of users modifying safety devices
Validity check of design and installation of integrated system
Indication of contact information or important notifications related to use and safety
Provision of technical documents including various manuals
Provision of information on standards and legislation applied: http://www.doosanrobotics.com/

Compliance with the safety requirements in this manual does not mean all risks can be prevented.