Screen Saver Mode Setting

If the teach pendant is not used for a set amount of time, the system enters screen saver mode.

• The robot can enter screen saver mode even if it is operating in Auto mode.
• Tap the Return button on the screen saver to return to the previous screen.

To configure the screen saver mode, follow these steps:

1. Tap the Settings button on the main menu and select Screen Saver.
2. Screen saver use can be configured in the Screen Saver Setting screen.
   • The default setting is Use Screen Saver.
     

     

3. This configures the time required to elapse before entering the screen saver mode.
   • Default: 5 minutes
   • Minimum Time: 1 minute
   • Maximum Time: 24 hours (1440 minutes)
4. Tap the Confirm button.