Skip to main content
Skip table of contents

Network Setting

To set the network, follow these steps:

  1. Tap the Settings button of the main menu and select Network.
  2. Select the Controller or Modbus tab.
    • Controller: Ethernet network settings for external connections such as the controller or Modbus can be configured.
    • Modbus: Additional settings for user-defined Modbus including Modbus TCP/RTU and additional settings for Preset Modbus used by some Workcell items can be set.
  3. Select the network method and tap the Confirm button.


Caution

To be able to set and use DHCP in A-Series models, it is necessary to purchase an external router and configure a network.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.