struct.CONFIG_ANALOG_WELDING_SETTING

This structure contains analog welding configuration information.

The _iVirtualWelding member variable sets the virtual welding mode. A value of 0 means actual welding, and a value of 1 means virtual welding.
The _fTargetVoltage, _fTargetCurrent, and _fTargetVel member variables set the target voltage, target current, and target speed, respectively.
The _fMinVel and _fMaxVel member variables set the minimum speed and maximum speed, respectively.
The _tDetail member variable is a structure that contains detailed welding configuration information.
The _fRs, _fTss, _fTas, _fTwc, _fRf, _fTaf, and _fTsf variables represent the start rate, shielding gas release time, start current time, welding condition change time, end rate, end current time, and end shielding gas release time, respectively.
The _fStartVoltage and _fEndVoltage variables represent the start voltage condition and end voltage condition, respectively.
The _fTargetFeedingSpeed member variable sets the target feeding speed.

BYTE#	Member Variable	Data Type	Value	Description
0	`_iVirtualWelding`	`unsigned char`	0 or 1	0: Real Welding 1: Virtual WElding
1	`_fTargetVoltage`	`float`		Target Voltage
5	`_fTargetCurrent`	`float`		Target Current
9	`_fTargetVel`	`float`		Target Speed(mm/sec)
13	`_fMinVel`	`float`		Minimum Speed
17	`_fMaxVel`	`float`		Maximum Speed
21	`_tDetail._fRs`	`float`		Start Rate
25	`_tDetail._fTss`	`float`		Shielding Gas Release time(sec)
29	`_tDetail._fTas`	`float`		Start Current Time (sec)
33	`_tDetail._fTwc`	`float`		Welding Condition changed time(sec)
37	`_tDetail._fRf`	`float`		Terminate Ratio
41	`_tDetail._fTaf`	`float`		Terminate Current Time (sec)
45	`_tDetail._fTsf`	`float`		Terminated shielding Gas Release time(sec)
49	`_tDetail._fStartVoltage`	`float`		Start Voltage Condition
53	`_tDetail._fEndVoltage`	`float`		Terminate Voltage Condition
57	`_fTargetFeedingSpeed`	`float`		Target Feeding Speed